DS-950 Electricity Heating Varnishing Machine

Product Description1.Total length: 33meter2.Total height: 1.5meter3.Total width: 1.3meter4.Effective width: 950mm5.Feeding paper sheet way: feeder auto feeding6.Collating paper way: auto collating7.To




DS950 Electricity Heating Varnishing Machine

Mainly included items and technical dimensions:

1. Automatic paper-feeding feeder, produced by our factory (Same as cards slitting and collating machines).

 

2. Automatic paper receiving. The speed of the mesh belt at the machine head is regulated by frequency conversion.

The machine head is equipped with a single rubber roller, the material of which is polyurethane rubber coating, and the hardness is approximately 55-58 degrees.

 

3. The conveyor belt is made of galvanized steel wire mesh.

 

4. The effective width of the equipment is 950mm.

 

5. The heating method is heating by far-infrared lamp tubes, which is divided into 6 groups of temperature control, and a three-phase balance is required.

 

6. Electrical appliances (wires) and materials other than the equipment are not included. The external slurry tank is included.

 

7. The diameter of the varnishing rubber roller is 105mm. The length of the heating oven and the oil-applying machine head is 18meter , the length of the heat dissipation part is 7 meters, the length of the paper-feeding part and the feeder is approximately 3.5 meters, the length of the paper receiving part is 4 meters, the total length is approximately 32.5 meters, the total height is approximately 2 meters, and the total width is approximately 1.5 meters.

 

The designed running speed of this equipment is 35-50 meters per minute.

 

A set of commonly used accessories and tools is provided.



Tel
E-mail
WhatsApp
WeChat